Piezoelectric Sensor Group

Accelerometers

Product Lineup

Selection guide
Selection guide

This selection guide summarizes the main characteristics of each model.
Please use this guide for your product selection.

Charge output accelerometers
Charge output accelerometers

Charge output accelerometer output high-impedance charge signals proportional to the vibration strength.
For this reason, a charge amplifier is required before the measurement instrument to convert the high-impedance signals into low-impedance voltage signals.
FUJI CERAMICS offers miniature, General purpose, high sensitivity, high temparature types of sensors.

Accelerometers with a built-in amplifier
Accelerometers with a built-in amplifier

With the help of a built-in preamplifier, accelerometers with a built-in amplifier output low-impedance voltage signals proportional to the vibration strength.
A line-drive constant-current power supply powers these sensors.
FUJI CERAMICS offers miniature, general purpose, high sensitivity, low temparature types of sensors.

Industrial accelerometers for machine monitoring (Water proof and insulated)
Industrial accelerometers for machine monitoring (Water proof and insulated)

These are robust, waterproof, and insulated acceleration sensors.

Triaxial accelerometers
Triaxial accelerometers

These are accelerometers that can measure vibrations in the X, Y, and Z directions at the same time.
FUJI CERAMICS offers charge output type and voltage output type (built-in pre-amplifier).

Special sensors
Special sensors

FUJI CERAMICS also offers custom-made composite sensors and sensors for specific use to satisfy customer needs.

Cables & connectors
Cables & connectors

FUJI CERAMICS offers various cables with connectors to connect sensors and measurement instruments.
Usually, a charge output accelerometer is used with a low-noise cable, and a preamplifier-built-in sensor is used with a coaxial cable. Select a suitable cable, taking into account the environment-related preformance of the cables.

Mounting adapters
Mounting adapters

FUJI CERAMICS offers various mounting adapters for sensor installation.
We offer various range of mounting adapters. Use the adapter best suited to your intended application, and give careful consideration to the influence on the sensor’s frequency characteristics.

Charge converters & power supply
Charge converters & power supply

A charge converter is a line-drive-type preamplifier that converts high-impedance charge signals output from a charge output accelerometers into low-impedance voltage signals.
We also offers charge converters and line-drive constant-current power supplies that power accelerometers with a built-in amplifier.

General catalog of piezoelectric sensor products
General catalog of piezoelectric sensor products

This catalog introduces many piezoelectric sensor products best suited for measuring, testing, and diagnostic equipment, such as accelerometers, acoustic emission (AE), and force sensors.

* To download, user registration is required. Various catalogs and technical documents can be downloaded from here.

Inquiries
Please contact us here for inquiries about
FUJI CERAMICS' products and company information.

Overseas Sales Section.
+81-544-58-4466

Service hours: Monday to Friday 8:00 to 17:00
(Closed Saturdays, Sundays, and holidays)